Dice holder for kiddo. Stl https://www.thingiverse.com/thing:2573080
Peach wine. 5 lbs of peaches made about half a gallon. Tons of sediment. Lessons learned - doesn't need extra acid. Could use some more tannin and some back sweetening.
mooklepticon 2w ago • 100%
Nope. Instead treated it a giant batch of starter. Made 6 loaves.
Was having clogging issues so I thought I'd replace and get the mythically good capricorn tubes. This is a good sign that I needed to.
cross-posted from: https://lemm.ee/post/38646723 > Chocolate hazelnut porter, first tasting. Good porter. Medium chocolate flavor. No hazelnut. Sigh. Needs more nut extract. Not much head or carb.
Chocolate hazelnut porter, first tasting. Good porter. Medium chocolate flavor. No hazelnut. Sigh. Needs more nut extract. Not much head or carb.
mooklepticon 3mo ago • 100%
A fermented food festival sounds fun!
mooklepticon 3mo ago • 100%
Thanks for the tip.
Good to hear, I like chipotle.
mooklepticon 3mo ago • 100%
Got enough chromium in my diet, thanks!
mooklepticon 3mo ago • 100%
Will do.
mooklepticon 3mo ago • 100%
I'll report back later :)
Did a double batch of starter bc I want to bake 2 loaves. Breadimus Prime tried to make an escape!
Just starting this book and my hot sauce journey. Anyone tried this book? Any good or bad recipes?
mooklepticon 3mo ago • 100%
Mild tang. Good bready flavor. Mostly made into toast for butter and jam.
This has happened 3 times. I load the app. I switch from my main account to this one. I wait a few seconds for it to load. I go to the bready community. It shows the all feed but it says bready at the top. I try to post, it's as if I'm posting from all, not bready, and asks me to pick a community. It doesn't do this with homebrewing or 3d printing.
Also, my mug works as a grain scoop nicely. https://files.catbox.moe/sdesos.jpg
Make it eeeeeevry weekend. Give away 1/2 to 2/3 of them.
First attempt at pizza roll ups. Not bad, need work, but tasty. 3/5* s Used this recipe but cut the lemon and changed the filling to pizza stuff. https://youtu.be/eP-gFkNE4-A
I have to have that spider mech.
mooklepticon 4mo ago • 100%
It was soupy indeed. Did not rise hardly at all.
I've been trying to troubleshoot a surface texturing issue for several weeks. I accidentally noticed the pulley had wobble, but thought it was the stepper motor at first. Nope. It's the pulley.
Accidentally left my dough in the proofer overnight. I wonder if it'll do a second rise. Time to find out.
mooklepticon 4mo ago • 100%
Make the recipe 10% or 20% more. It fit a 8x8 but not well.
Try AP flour instead of bread. It was good, but I'm just curious.
Try the whole egg in the dough instead of just yolk. I don't know much about why sometimes yolk alone or not.
Crumble topping maybe. The cream cheese is good, but I like crumble stuff better usually.
Cut back on the lemon. It's really strong. I didn't measure it well, just put a dash in, but it was a lot. The blueberry was second place and I'd like to taste it more.
mooklepticon 4mo ago • 100%
Yes. Blend them into a puree, use same amount as blueberries. Probably blanch the skins off.
Very stressed out, so that means baking! Blueberry lemon Roll Ups recipe by ChainBaker. https://youtu.be/eP-gFkNE4-A
mooklepticon 5mo ago • 100%
There's a cereal bowl on the left if that helps.
mooklepticon 5mo ago • 100%
Depends on how dense the board is. Infill is a choice when printing, so more plastic means more cost. I get my filament from $10 to $20 kg. Depends on sales and colors and such. These prints cost me $2 ish.
mooklepticon 5mo ago • 100%
Theres a cereal bowl to the left. No bananas in it tho.
Desk knick knacks.
Tiny desk shelves for kiddo. Stl https://www.printables.com/model/713135-tabletop-shelf-rack
mooklepticon 5mo ago • 100%
I wouldn't do that in the slicer, it's too hard to align them. I don't know about any alignment tools in slicers. I could do that in Fusion360, however.
Printed out this little bathroom or whatever organizer. Gridfinity is neat. Choose your bins, glue to the base and viola. Stl https://thangs.com/category/Gridfinity
mooklepticon 6mo ago • 100%
Good eye, bub.
mooklepticon 6mo ago • 100%
Got them for free, other wise I wouldn't. They're also only 3 gallons, so a lot easier to handle. Haven't tried them yet, but a porter is going in this weekend.
mooklepticon 6mo ago • 100%
Check out some of the references! They were so flimsy.
STL https://www.printables.com/model/866603-carboy-dryer-stackable **Description** I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too. **References:** 1. This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2 2. I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer 3. This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand 4. This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy 5. This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer **Licensing:** Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it.
cross-posted from: https://lemm.ee/post/31379850 > STL https://www.printables.com/model/866603-carboy-dryer-stackable > > **Description** > I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too. > > **References:** > 1. This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2 > 2. I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer > 3. This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand > 4. This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy > 5. This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer > > **Licensing:** Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it. Shout out to [!homebrewing@sopuli.xyz](https://sopuli.xyz/c/homebrewing)
STL https://www.printables.com/model/866603-carboy-dryer-stackable **Description** I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too. **References:** 1. This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2 2. I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer 3. This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand 4. This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy 5. This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer **Licensing:** Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it. Shout out to [!homebrewing@sopuli.xyz](https://sopuli.xyz/c/homebrewing)